how to remove harpic stains from toilet seat

Harpic stains on a toilet seat can be challenging to remove, but with the right approach, you can effectively clean the stains. Harpic is a toilet bowl cleaner that can leave stubborn stains if it comes into contact with the seat. Here’s how to remove Harpic stains from a toilet seat:

Materials you may need:

  1. Rubber gloves
  2. Protective eyewear (optional)
  3. Toilet bowl cleaner (mild, non-abrasive)
  4. Baking soda
  5. White vinegar
  6. Soft cloth or sponge
  7. Old toothbrush (optional)
  8. Paper towels or a clean cloth


  1. Put on Protective Gear:
    • To protect your hands, put on rubber gloves. You may also want to wear protective eyewear to prevent any splashes.
  2. Ventilate the Area:
    • Make sure the bathroom is well-ventilated by opening a window or turning on the exhaust fan. This will help with air circulation and reduce exposure to cleaning fumes.
  3. Flush the Toilet:
    • Start by flushing the toilet to remove any residual Harpic cleaner from the bowl.
  4. Apply Toilet Bowl Cleaner:
    • Apply a mild, non-abrasive toilet bowl cleaner to the stained areas on the toilet seat. Make sure the cleaner is safe for the material of your toilet seat. Follow the manufacturer’s instructions for the cleaner.
  5. Let it Sit:
    • Allow the cleaner to sit on the stains for a few minutes. This will help break down the Harpic residue.
  6. Scrub Gently:
    • Use a soft cloth or sponge to gently scrub the stained areas. If the stains are stubborn, you can use an old toothbrush for more targeted scrubbing. Be careful not to scratch the surface of the toilet seat, especially if it’s made of plastic.
  7. Rinse with Water:
    • Thoroughly rinse the toilet seat with clean water. You can use a cup or a showerhead if available to ensure all the cleaner is washed away.
  8. Apply Baking Soda Paste:
    • If stains persist, make a paste by mixing baking soda with a small amount of water. Apply the paste to the stained areas and let it sit for a few minutes. Baking soda is mildly abrasive and can help lift stains.
  9. Scrub Again:
    • Use a soft cloth or sponge to scrub the stained areas with the baking soda paste. Be gentle to avoid scratching the surface.
  10. Rinse with Vinegar:
    • To further remove stains and disinfect the toilet seat, apply white vinegar to a clean cloth or sponge and wipe down the entire seat. Vinegar is effective at breaking down mineral deposits and stains.
  11. Rinse Thoroughly:
    • Rinse the toilet seat again with clean water to remove any remaining residue from the cleaning process.
  12. Dry the Seat:
    • Use paper towels or a clean cloth to dry the toilet seat thoroughly. This will help prevent future staining.
  13. Inspect and Repeat (if necessary):
    • Check the seat for any remaining stains. If necessary, repeat the cleaning process until the stains are gone.

By following these steps, you should be able to effectively remove Harpic stains from your toilet seat. Regular cleaning and maintenance will help prevent future stains.

Also Read:

Leave a Reply