how to remove armor all from plastic
Armor All is a product designed to protect and enhance the appearance of various automotive surfaces, including plastic. If you need to remove Armor All from plastic, follow these steps:
Materials you will need:
- Mild dish soap
- Water
- Microfiber or lint-free cloth
- Soft-bristle brush (optional)
Steps:
- Prepare a Soapy Solution: Mix a solution of warm water and mild dish soap. Use about a teaspoon of dish soap in a quart of warm water. This will create a gentle cleaning solution that can help break down and remove the Armor All.
- Dampen a Cloth: Dampen a clean, lint-free cloth or microfiber towel with the soapy water solution. Ensure the cloth is not soaking wet, but just damp.
- Gently Wipe the Plastic: Gently wipe the Armor All-treated plastic surface with the damp cloth. Use a circular or back-and-forth motion to lift and dissolve the Armor All. Be patient and persistent, as it may take some time to remove all traces.
- Rinse with Clean Water: After wiping with the soapy water solution, rinse the plastic surface with clean water to remove any soap residue. You can either use a clean damp cloth or simply run water over the plastic if it’s safe to do so.
- Dry Thoroughly: Use a separate clean, dry cloth or paper towel to thoroughly dry the plastic surface. This will help ensure no streaks or residue are left behind.
- Inspect the Plastic: After cleaning and drying, inspect the plastic to make sure all the Armor All residue is gone. If you still see any residue, repeat the cleaning process until the plastic is clear.
- Use a Soft-Bristle Brush (if needed): If there are any stubborn areas where Armor All is difficult to remove, you can use a soft-bristle brush (like a toothbrush) to gently scrub the area. Make sure not to use a brush with stiff bristles, as it can scratch the plastic.
- Prevent Future Overspray: To prevent future accidents or overspray of Armor All on plastic surfaces, consider using a shield or barrier to protect the plastic when applying the product. This can include masking tape or plastic sheeting.
Always be gentle when cleaning plastic surfaces to avoid scratching or damaging them. Avoid using abrasive materials or harsh chemicals that can harm the plastic. If you encounter persistent residue or staining, consider seeking professional help or using a plastic-specific cleaner recommended by the manufacturer for a more thorough cleaning.
Also Read:
https://fastspotter.com/how-to-remove-boat-interior-side-panels/
https://fastspotter.com/how-to-remove-boat-seats/
https://fastspotter.com/how-to-remove-bob-stroller-tire/
https://fastspotter.com/how-to-remove-camshaft-without-removing-engine/
