how to clean cerakote gun

Cerakote is a durable ceramic-based finish often used on firearms to protect them from corrosion and wear while providing various color options. Cleaning a Cerakote-coated gun is essential to maintain its appearance and functionality. Here’s a step-by-step guide on how to clean a Cerakote gun:

https://fastspotter.com/how-to-clean-a-euhomy-ice-maker/
https://fastspotter.com/how-to-clean-a-farberware-coffee-pot/

Materials You’ll Need:

  • Cleaning mat or surface
  • Cleaning rod or cable
  • Bore brush and patches
  • Cleaning solvent or gun cleaner
  • Gun oil or lubricant
  • Nylon or brass cleaning brushes
  • Toothbrush or detail brush
  • Microfiber cloths or gun cleaning patches
  • Cleaning jag or slotted tip
  • Q-tips or cotton swabs
  • Gloves (optional)
  • Eye protection (safety glasses)

Steps to Clean a Cerakote Gun:

  1. Safety First:
    • Ensure the firearm is unloaded. Remove the magazine and check the chamber to make sure it’s empty. Wear safety glasses to protect your eyes during cleaning.
  2. Prepare Your Cleaning Area:
    • Work on a clean and organized surface, preferably a cleaning mat or table designed for firearms maintenance.
  3. Field Strip the Firearm (if applicable):
    • Field strip the gun to its basic components, following the manufacturer’s instructions in the firearm’s manual. This allows better access for cleaning.
  4. Clean the Bore:
    • Attach a bore brush to the cleaning rod or cable, dip it in a gun cleaning solvent, and run it through the barrel several times to remove fouling and residue. Follow with patches until they come out clean.
  5. Clean the Exterior:
    • Apply a small amount of gun cleaner or solvent to a cloth or patch and wipe down the exterior of the firearm. Use a nylon or brass brush for stubborn residue, and use a toothbrush or detail brush for hard-to-reach areas. Pay attention to the slide, frame, and other components.
  6. Inspect and Clean the Chamber and Feed Ramp:
    • Use a chamber brush or a patch wrapped around a cleaning jag to clean the chamber area. Inspect the feed ramp for any buildup or residue and clean it as needed.
  7. Clean Small Components:
    • If you’ve field-stripped the firearm, clean smaller components like the recoil spring, guide rod, and trigger assembly as per the manufacturer’s recommendations.
  8. Apply Lubrication:
    • Apply a light coat of gun oil or lubricant to all moving parts and contact points. Be sure not to over-lubricate, as excess oil can attract dirt and debris.
  9. Wipe Down and Reassemble:
    • Use a clean, dry cloth or gun cleaning patches to wipe down all surfaces, removing any excess oil. Reassemble the firearm following the manufacturer’s instructions.
  10. Function Check:
    • Perform a function check to ensure the firearm operates correctly and safely.
  11. Final Inspection:
    • Inspect the Cerakote finish for any damage or wear. Touch up any worn areas if needed, following the manufacturer’s instructions.
  12. Storage:
    • Store the firearm in a cool, dry place, preferably in a gun safe or secure location.

Regular cleaning and maintenance will help preserve the Cerakote finish on your gun and ensure its reliability. Follow the manufacturer’s recommendations for cleaning and lubrication, and always prioritize safety when handling firearms.

Also Read:
https://fastspotter.com/how-to-clean-a-canteen/
https://fastspotter.com/how-to-clean-a-chandelier-on-a-high-ceiling/

Leave a Reply